Epson ET-2650 Scanner Setup and Driver Download

Friday, December 21st, 2018 - ET Series
Epson ET-2650

Epson ET-2650

Epson Printer ET-2650 Setup, Software Driver Setup Download, User Manual, Wireless Setup and Net Setup Printer Scanner For Mac, Windows, Linux – Expression ET-2650 EcoTank All-in-One Inkjet Printer, Notwithstanding when contrasted and also top of the line Office inkjet printers print, the costs are remarkably low. In any case, instead of this, neither the initial shading ink is still the dark ink is pigmented. While this agrees with position for prints on glossy paper, nevertheless sustains the solidness when inscribing on ordinary paper. Both versions should be accessible in February as well as supplant their antecedents. The assurance naturally just 12 months or 30,000 web pages – trusting just what takes place first. Because of the task, you get a cost-free development to 36 months at amazing enlistment on an Epson Web page (also, or 30,000 pages). Costs from 300 euro, toughness is nevertheless similarly frantically called for, so that the high initial supposition pays for itself.

The Epson ET-2650 Scan could divide themselves a little bit. Just what’s even more, there is a support for WiFi coordinate. By doing this you could interface firmly to the printer also visitors, without discharging the nearby system. The around 50 euros more expensive version with a minor shading program for a remarkable procedure and a collaborated sd card peruser (SD) is prepared. At 11.9 by 17.5 by 20.8 inches (HWD) when open for printing, and also 11 pounds, the ET-2650 is light as well as portable and also should conveniently fit on the typical desktop computer. Paper managing includes a 100-sheet tray that extends upward from the back, and also published pages unload onto a 30-sheet tray that takes out from the front. As mentioned, it doesn’t print two-sided web pages immediately nor does it have an ADF for sending multipage files to the scanner.

The Expression ET-2650 EcoTank cordless all-in-one supplies revolutionary cartridge-free printing with easy-to-fill, supersized ink storage tanks. It includes approximately 2 years of ink in the box. That’s an extraordinary amount of ink– enough to print as much as 4,000 web pages, as well as comparable to about 20 ink cartridge sets3. The ET-2650 supplies an unbeatable mix of ease as well as value, giving you the flexibility to print anything you want in shade, without fear. Plus, conserve up to 80 percent on ink with inexpensive substitute containers. The ET-2650 features built-in wireless for printing from tablet computers and smartphones5, plus a 1.44″ color LCD as well as built-in card slot.

Epson ET-2650 Initial Ink Charging:

  • T664 Black Ink Bottle (70mL)
  • T664 Cyan Ink Bottle (70mL)
  • T664 Magenta Ink Bottle (70mL)
  • T664 Yellow Ink Bottle (70mL)

[su_tabs style=”sharp”][su_tab title=”OS Compatible“]

Windows 10, 8.x (32/64-bit), 7 (32/64-bit), Vista (32/64-bit) XP SP3 (32-bit), XP Professional x64 Edition (64-bit), Server 2012 R2, Server 2012, Server 2008 R2, Server 2008, Server 2003 R2, Server 2003
Mac OS X 10.6.x-10.10.x

[/su_tab] [su_tab title=”Specifications“]

Epson ET-2650 Specs

Printer
Printing TechnologyInkjet
Maximum Resolution5760 x 1440 dpi
Print SpeedBlack: 10 ppm
Color: 4.5 ppm
Minimum Ink Droplet Size3 pL
Ink TypeDye
Ink PaletteCMYK
Ink Cartridge Configuration4 refillable ink tanks
Printer LanguageESC/P-R
Scanner
TypeFlatbed
Image SensorCIS Line Sensor
Light SourceLED
Optical Resolution2400 dpi
Hardware Resolution1200 x 2400 dpi
Interpolated Resolution9600 dpi
Color DepthColor: 48-bit internal / 24-bit external
Grayscale: 16-bit internal / 8-bit external
Black & White: 16-bit internal / 1-bit external
Maximum Scan AreaFlatbed: 8.5 x 11.7″ / 21.6 x 29.7 cm
Copier
Copy SpeedBlack: 7.7 cpm
Color: 3.7 cpm
Number of CopiesUp to 20
Reduction/Enlargement25-400%
Maximum Copy Size8.5 x 11″ / 21.6 x 27.9 cm
Media Handling
Paper HandlingInput Tray
Output Tray
Paper Sizes3.5 x 5″ to 8.5 x 47.2″ / 8.9 x 12.7 cm to 21.6 x 119.9 cm
Paper TypesPlain
Photo
Media WeightInput Tray: 17-24 lb / 64-90 gsm
Paper CapacityInput Tray: 100 sheets
Output Tray: 30 sheets
Special Media SupportEnvelopes
Connectivity
Computer InterfaceUSB 2.0
Wi-Fi
Direct PrintingWi-Fi Direct
SD/SDHC/SDXC card slot
Epson iPrint
Apple AirPrint
Google Cloud Print
Android printing
Fire OS printing
Mopria Print Service
Compatible Operating SystemsWindows
Mac OS X, macOS
Physical
Control Panel1.44″ / 3.65 cm color LCD
Buttons
Power Requirements100-240 VAC, 50-60 Hz, 0.5-0.3 A
Power ConsumptionMaximum: 13 W
Off: 0.3 W
AcousticsSound Power: 5.8 dB(A)
Sound Pressure: 45 d(B)A
Operating ConditionsTemperature: 50 to 95°F / 10 to 35°C
Humidity: 20 to 80%
Storage ConditionsTemperature: -4 to 104°F / -20 to 40°C
Humidity: 5 to 85%
Dimensions (WxDxH)Printing: 17.5 x 20.8 x 11.9″ / 44.5 x 52.8 x 30.2 cm
Storage: 17.5 x 12 x 6.7″ / 44.5 x 30.5 x 17 cm
Weight11 lb / 5 kg
Packaging Info
Package Weight15.0 lb
Box Dimensions (LxWxH)23.0 x 14.5 x 10.0″

[/su_tab] [su_tab title=”Download“]

Epson ET-2650 Printer Driver Download

Operating System Support
Download
Epson ET-2650 Mac Scanner Driver and Epson Scan 2 Utility v6.1.3 (OS X 10.12 /10.11 /10.10 /10.9)
Epson ET-2650 Mac Printer Driver  Ver. 9.84  (OS X 10.12/10.11/10.10/10.9)
Epson ET-2650 Windows Printer Driver Ver. 2.50 (Windows XP/Vista/7 64-bit)
Epson ET-2650 Windows Printer Driver Ver. 2.50 (Windows XP/Vista/7 32-bit)
Epson ET-2650 Windows Software Scanner Driver and EPSON Scan Utility   Ver. 6.0.3.0 (Windows XP/Vista/7 32/64-bit)
Epson ET-2650 Windows Printer Driver Ver. 2.50 (Windows 8/8.1/10 32-bit)
Epson ET-2650 Windows Printer Driver  Ver. 2.50 (Windows 8/8.1/10 64-Bit)
Epson ET-2650 Windows Software Scanner Driver and EPSON Scan Utility   Ver. 6.0.3.0 (Windows 8/8.1/10 32/64-bit)

[/su_tab][/su_tabs]

[su_spoiler title=”Epson ET-2650 Setup For Windows” style=”modern-light”]

Follow the steps below to enable Epson Connect for your Epson printer in Windows:

Note: Make sure your product is set up with a wireless or Ethernet connection as described on the Start Here sheet for your product.

To see the Start Here sheet, go to the Epson support main page, select your product, select Manuals, then click Start Here.

  1. Download and install the Epson Connect Printer Setup Utility.
  2. Agree to the End-User License Agreement, then click Next.
  3.  Click Install, then Finish.
  4. Select your product, then click Next.
  5. Select Printer Registration, then click Next.
  6. Select Agree, then click Next.
  7. When you see the Register a printer to Epson Connect message, click OK.
  8. If you’re creating a new account, fill out the Create an Epson Connect Account form, then click Finish.
  9. If you’re registering a new product with an existing account,
  10. select I already have an account, fill out the Add a new printer form, then click Add.
    Click Close.
  11. See our Activate Scan to Cloud and Remote Print instructions to activate the Scan to Cloud and Remote Print services.

[/su_spoiler]

[su_spoiler title=”Epson ET-2650 Setup For Mac” style=”modern-light”]

Follow the steps below to enable Epson Connect for your Epson printer on a Mac:

Important: Your product needs to be set up with a network connection before it can be set up with Epson Connect. If you need to set up the connection, see the Start Here sheet for your product for instructions. To see the sheet, go to the Epson support main page, select your product, Manuals, and Warranty, then Start Here.

  1. Download and run the Epson Connect Printer Setup Utility.
  2. Click Continue.
  3. Agree to the Software License Agreement by clicking Continue, and then Agree.
  4. Click Install, and then click Close.
  5. Select your product, and then click Next.
    Note: If the window doesn’t automatically appear, open a Finder window and select Application > Epson Software, and then double-click Epson Connect Printer Setup.
  6. Select Printer Registration, and then click Next.
  7. When you see the Register a printer to Epson Connect message, click OK.
  8. Scroll down, click the I accept the Terms and Conditions check box, and then click Next.
    Do one of the following: If you’re creating a new account, fill out the Create An Epson Connect Account form, then click Finish.
    If you’re registering a new product with an existing account, click I already have an account, fill out the Add a new printer form, and then click Add.
    Click Close.
  9. See our Activate Scan To Cloud and Remote Print instructions to activate the Scan to Cloud and Remote Print services.

[/su_spoiler]

[su_spoiler title=”Epson ET-2650 Wireless Setup” style=”modern-light”]

How to connect an Epson ET-2650 Series Wireless Printer

  1. Make sure you know your network name (SSID) and network password.
  2. For Direct USB Connection, Make sure the USB cable is connected on both ends of computer and the printer on the USB Port. (USB Cable is not included in the sales package)

Network Setup
The wireless printer can be “connected” via a wireless adapter installed in a computer or connected through a wireless router. To connect to your local network the printer must be set to settings compatible with your network. To set the settings on the adapter you must first connect to the printer in its current or default state.

Outline of the Process:

  1. Determine the settings of the printer
  2. Reset the settings to the default
  3. Configure a wireless computer or device to talk to the printer
  4. Set the printer to the desired settings
  5. Install the printer drivers and install the printer under Windows

Getting Initial Printer Settings

To setup an Epson wireless printer, you must get the current settings of the wireless printer by  running the printer self test. To do this hold down the feed button while turning on the printer. The printer will print a list of initial settings including SSID (network ID), Mode (Ad-Hoc or Infrastructure), current IP address (default: 192.168.192.168)

The self test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, control software version, and DIP switch settings.
This test is independent of any other equipment or software, so it is a good idea that run it when you first set up the printer. If the self test works correctly, it suggests the problem may be with the other equipment or the software, not the printer.

  1. To Run the Self Test
    Make sure the printer is turned off and the roll paper cover is closed properly.
    While holding down the FEED button, turn on the printer using the switch on the top front of the printer.
  2. The self-test prints the printer settings and then prints the following cuts the paper, and pauses.
  3. A sheet will print showing the MAC address, SSID, mode, wireless channel number, authorization method (None, WEP), Gateway (GW), IP address and IP assignment method.
  4. The network specific settings have been highlighted above.
  5. Check that the settings are reset by running the wireless card self-test, above.

[/su_spoiler]

 

Epson ET-2650 Scanner Setup and Driver Download | Mark | 4.5